Smooth Fitness 07858-699 Function, Pulse value monitoring, Completion of preset data, Count-down

Fig. 19	Fig. 20
Manual pulse selection	Manual pulse input, e.g. 85%

With the set key you accept the pulse zone and get to completion of preset data (item 4.4.5.).

Function

Through the pulse zone input and the accepted or altered max. pulse a pulse zone monitoring is activated. If you fall below the preset training pulse by 11 beats, the lettering "LO" appears; if you exceed it by 11 beats, the display will show "HI". The "LO" monitoring is active, if the preset training pulse is reached for the first time when pedalling. If the pedal speed falls to zeros, the "LO" function will become active again when reaching the preset training pulse. The "HI" monitoring is always active.

The value which is displayed with the % symbol is the comparison between current pulse value and max. pulse value.

If you do not enter any max. pulse value, the % pulse display is not active.

4.4.4 Pulse value monitoring

This input is possible with the +/- keys in the range of 40 - 188.

Fig. 21

Pulse value input, e.g. 150

Function

The "HI" and "LO" display functions as described under 4.4.3. The % pulse display is not available.

Switch the pulse value monitoring off: "OFF" display, all pulse mo- nitoring functions are de-activated.

Note

Previously set pulse values in the HRC program are accepted and appear in the display.

In this mode, the training pulse has no influence on the perfor- mance.

(Such a function is offered by the HRC program.)

4.4.5 Completion of preset data

If you press the set key after the last preset value (except in the programs 1-6), all preset values (except preset pulses) will be dis- played. The graphics field will read the lettering "Ready" (Fig. 22).

￿
KM/H	KM	WATT
TIME
RPM	KILOJOULE	PULSE

Fig. 22

Display with preset value prior to start of training

Possibilities of preset training values in the program types:

Count-up

Standard values:

•KM (distance): 0.0 km

•Time (training time): 0:00 min.

•Kilojoule (energy consumption): 0 kJ

•Training pulse: - -

•Max. pulse: - -

•Performance: 25 Watt

Possibilities of preset values in the sequence:

•Age

•Max. pulse

•Pulse zones Fat 65%, Fit 75% and Man. - - %

•Performance

Count-down

Standard values:

•KM (distance): 0 km

•Time (training time): 0:00 min.

•Kilojoule (energy consumption): 0 kJ

•Training pulse: - -

•Max. pulse: - -

•Performance: 25 Watt

Possibilities of preset values in the sequence:

•KM (distance)

•Time (training time)

•Kilojoule

•Age

•Max. pulse

•Pulse zones Fat 65%, Fit 75% and Man. - - %

•Performance

Note:

At least preset the training distance or training time or energy con- sumption, otherwise the electronic system will start in count-up mode when taking up training.

If training time, training distance and energy consumption have been counted down to zero, the display will change into count-up mode. Now, the values will again count up from the preset values.

Programs 1-6

Standard values:

•KM (distance): 0.0 km

•Time (training time): depending on program

•Kilojoule (energy consumption): 0 kJ

•Training pulse: - -

•Max. pulse: - -

•Performance: depending on program

Possibilities of preset values in the sequence:

•Age

•Max. pulse

•Pulse zones Fat 65%, Fit 75% and Man. - - %

5