Before Requesting Service

These things are normal:

The oven causes

Some radio and TV interference might occur when you cook

interference with

with the microwave oven. This interference is similar to the

my TV.

interference caused by small appliances such as mixers,

 

vacuums, blow dryers, etc. It does not indicate a problem with

 

your oven.

 

 

 

Steam accumulates on the oven door and warm air comes from the oven vents.

During cooking, steam and warm air are given off from the food. Most of the steam and warm air are removed from the oven by the air which circulates in the oven cavity. However, some steam will condense on cooler surfaces such as the oven door. This is normal. After use, the oven should be wiped dry (see page 25).

PROBLEM

Oven will not turn on.

Oven will not start cooking.

" " appears in the Display Window.

The oven stops cook- ing and "H97" or "H98" appears in the display window.

POSSIBLE CAUSE

REMEDY

The oven is not plugged in

Remove plug from outlet, wait

securely.

10 seconds and re-insert.

Main circuit breaker or main

Reset main circuit breaker or

fuse is tripped or blown.

replace main fuse.

There is a problem with the

Plug another appliance into the

outlet.

outlet to check if it is working.

The door is not closed

Close the oven door securely.

completely.

 

Start Pad was not

Press Start Pad.

pressed after programming.

 

Another program is already

Press Stop/Reset Pad to

entered into the oven.

cancel the previous program and

 

enter new program.

The program is not correct.

Program again according to the

 

Operating Instructions.

Stop/Reset Pad has

Program oven again.

been pressed accidentally.

 

The CHILD SAFETY LOCK

Deactivate CHILD SAFETY LOCK by

was activated by pressing

pressing Stop/Reset pad 3 times.

Start pad 3 times.

 

The oven unit power supply

Please contact an authorised

source failed.

Service Center (see page 27).

26

Page 28
Image 28
Panasonic NN-SF550M Before Requesting Service, Problem, Possible Cause Remedy, Stop/Reset Pad has