Novatel DL-V3 user manual Groupfixpos Configure Group to Fix Receiver Position

B.18 GROUPFIXPOS Configure Group to Fix Receiver Position

The groupfixpos command allows you to configure the group to fix the receiver position when the group is executed. groupfixpos and groupposave configurations are mutually exclusive, and the last setting to be entered takes effect.

groupfixpos set configures the group to fix the position to lat long height. groupfixpos clear clears the group position-fix configuration. groupfixpos default clears the group position-fix configuration.

Syntax

groupfixpos set groupname [lat [long [height]]]

groupfixpos defaultclear groupname

B.18.1 Groupuse Translation

groupuse start

If position fixing is configured in the group, the fix position command is executed with the supplied parameters.

groupuse stop

If position fixing is configured in the group, issues a fix none command.

Message ID = 58

Field	Data		Value Used if	Bytes	Format		Units	Offset
			Not Specified
1	Header		-		-		-	0
2	Parameter Update, see Table 34		-	4	Enum		none	H
	on Page 107
3	Group name		-	12	Char[]		none	H+4
4	Latitude		0	8	Double		degrees	H+16
5	Longitude		0	8	Double		degrees	H+24
6	Height		0	8	Double		metres	H+32
7	Reserved for future use		-1	4	Int		none	H+40
8			-1	4	Int		none	H+44
	Table 36: GROUPFIXPOS Default Configuration
	Parameter	Power-On		Freset		Stored in NVM

Fixed Position Configuration no change

CLEAR

YES

108 DL-V3 User Manual Rev 3