Novatel DL-V3 user manual Starting Groups

DL Explorer Chapter 4

Figure 27: Starting Groups

The Stop button in the Group Management dialog becomes active while the DL-V3 is logging the data. Click on the Stop button to stop the DL-V3 from logging the chosen log group. Only one log group may be started at a time.

A red cross beside a log group name indicates the group is not active in the DL-V3. A green check mark indicates the group is active in the DL-V3.

When there are groups in the DL Groups panel, you can also download them to CDU. To download groups to CDU, highlight them in the DL Groups panel and click on the Download button. The groups are downloaded to CDU and may then be seen in the CDU Groups panel.

To refresh the data displayed in the DL Groups panel, click on the Refresh button. Delete groups from the DL-V3 by first highlighting them and then clicking on the Delete button. To delete all the groups on the DL-V3, click on the Delete All button. There is no need to highlight any groups in the DL Groups panel in this case.

Files are stored on the CF card but groups are stored in the DL-V3’s NVM.

DL-V3 User Manual Rev 3 67