Novatel DL-V3 user manual Preset Powerup Group, Position Tab

Chapter 4 DL Explorer

Preset POWERUP Group

Your DL Explorer software is set up with a preset receiver group. Below is an outline of the POWERUP group. The group name, the logs within the group and the interval options are displayed (see details on editing trigger and interval information on Page 59).

Use this group when you are working with a receiver that is an RTK base and you want to post- process the data. You might also use this group for automatic data collection on the receiver.

Type of Information	Description
almanacb onchanged	current almanac
ionutcb onchanged	ionospheric and UTC clock parameters
rangecmpb ontime	compressed channel range measurements
10.0
rawephemb	raw ephemeris
onchanged
rtcaobs ontime 1.0	base station GPS data output every second
rtcaref ontime 10.0	base station position output every 10 seconds

The first four types of information (almanac, ionutc, rangecmp and rawephem) are typically used for post processing and are logged to the CF card. The last two (rtcaobs and rtcaref) are typically used for an RTK base station and are transmitted from COM2.

Position Tab

The second tab in the DL Groups dialog is the Position tab, see Figure 21 on Page 61. Click in one of the radio buttons that give you the option of having no position information, known fixed position information (a static point) or single-point averaging information.

If you choose No Position Information then the Position tab’s Known Position and Position Average edit boxes appear dim. If you choose Fixed Known Position then you must enter position information (latitude, longitude and ellipsoidal height) in the Known Position fields.

60 DL-V3 User Manual Rev 3