Novatel user manual Rxstatus DL-V3 Status, Auxiliary 2 Status Word

C.13 RXSTATUS DL-V3 Status

The AUXILIARY2 and AUXILIARY3 status words of the RXSTATUS log are defined as in Table 79 on Page 172 and Table 80 on Page 173, to indicate DL-V3 functionality. The corresponding priority, set and clear masks can be defined via the STATUSCONFIG command. Refer to the RXSTATUS log and STATUSCONFIG command in the OEMV Family Firmware Reference Manual.

1. These auxiliary word definitions replace those used in the DL-4 receivers.

2.The corresponding priority, set and clear masks can be defined via the OEMV STATUSCONFIG command.

Table 79: Auxiliary 2 Status Word

AUX2 Bit	Description	Bit=0	Bit=1	Trigger
0x00000001	DL-V3 status	not ready	ready	XCOM1 is
				initialized and
				ready for use
0x00000002	Shutdown indicator	no shutdown	shutting down	Press the power
				button or issue
				any of the
				softpower,
				freset or reset
				commands
0x00000004	DL-V3 boot status	boot in progress	boot done	All start-up
				events are
				complete
0x00000008	CF card status	not initialized	initialized	CF card
				removal or
				installation
0x00000010	File(s) status	all files closed	file(s) open	-
0x00000020	Site status	not occupied	occupied	-
0x00000040	Power button status	not pressed	pressed	Press the power
				button
0x00000080	Reserved			-
0x00000100				-
0x00000200	External power	not in use	in use	-

Continued on Page 173

172 DL-V3 User Manual Rev 3