Novatel DL-V3 user manual Application Functions, Application Parameters, BinaryASCII

Table 15: Application Functions

Binary	ASCII	Description
0	BLUETOOTH	Use BLUETOOTH followed by either 0 or 1 of the
		Application Parameters, see Table 16, to select
		either Bluetooth or Ethernet
8	OPTION	Use OPTION followed by 12 and then 9, from
		Table 16, to restore the Ethernet settings defaults.

Table 16: Application Parameters

BinaryASCII

0Select Bluetooth application

1Select Ethernet application

9 Restore Ethernet settings I

Examples:

To switch back to Bluetooth on COM3, issue this command:

APPCONTROL BLUETOOTH 0

To switch COM3 from Bluetooth to Ethernet, issue this command:

APPCONTROL BLUETOOTH 1

To restore Ethernet settings to their defaults and reset the receiver, issue this command:

APPCONTROL OPTION 12 9

To reset the XPORT-AR Ethernet device but not restore the Ethernet settings’ defaults:

APPCONTROL OPTION 12 1

86 DL-V3 User Manual Rev 3