Novatel DL-V3 user manual Siteupdateantheight Set Occupied Site Height

B.39 SITEUPDATEANTHEIGHT Set Occupied Site Height

The siteupdateantheight command allows you to configure the site antenna height information (AntHeight field in the sitedef log) once the site has been occupied (by issuing a site enter command).

The siteupdateantheight set command sets the site antenna height for an occupied site to antheight.

The siteupdateantheight default and the siteupdateantheight clear commands clear the site antenna height for an occupied site.

Syntax

siteupdateantheight set [antheight] siteupdateantheight defaultclear

Message ID = 167

Field		Data		Value Used if		Bytes		Format	Units	Offset
				Not Specified
1	Header			-				-	-	0
2	Parameter Update, see			-		4		Enum	none	H
	Table 34 on Page 107
3	Antenna height			0		4		Float	none	H+4
4	Reserved for future use			NUL		12		Char[]	none	H+8
	Table 60: SITEUPDATEANTHEIGHT Default Configuration
		Parameter	Power-On		Freset		Stored in NVM

AntHeight

clear

clear

NO

DL-V3 User Manual Rev 3 139