B.14 GROUPCOM Associate Port Configurations with a Group

This command allows you to associate one or more port configurations with a group. It is identical to the standard OEMV COM command but with these exceptions:

an additional leading argument is used to specify the associated groupname

configuration of COM3 and USB ports is not supported for GROUPCOM

1. GROUPCOM is not supported on the DL-V3’s COM3 port because it may cause the COM3 Bluetooth or Ethernet applications to become non-responsive. Both applications are preconfigured to the fixed baud rate of 1152000.

2.If you add GROUPCOM settings to a particular group, they do not take effect until the next time a GROUPUSE command is run for that group.

If added, each distinct group may have unique settings for GROUPCOM.

3.Use of the GROUPCOM command does not affect the INTERFACEMODE or COMVOUT settings for a group.

The set command provides the port settings that are configured the next time the named group is executed.

The clear command removes any port settings for the specified group name and port. No port configuration is performed for the specified port the next time the group is executed.

The default command removes any port settings for the specified group name and port. No port configuration is performed for the specified port the next time the group is executed.

Syntax

groupcom clear default groupname [com1com2aux]

B.14.1 Groupuse Translation

groupuse start

Settings for each configured groupcom port are set groupuse stop

N/A

100

DL-V3 User Manual Rev 3

Page 100
Image 100
Novatel DL-V3 user manual Groupcom Associate Port Configurations with a Group, 100