Novatel DL-V3 user manual Groupsitename Edit Group Site Name, Groupsitename Default Configuration

B.24 GROUPSITENAME Edit Group Site Name

The groupsitename command allows you to edit the site name definition for the group.

The groupsitename set command sets the site name for the group named groupname to sitename.

The groupsitename clear and the groupsitename default commands remove the site name setting from the group named groupname.

Syntax

groupsitename set groupname sitename

groupsitename defaultclear groupname

B.24.1 Groupuse Translation

groupuse start

The site name is reflected in the groupdef log.

If an automatic site is being generated (see the groupmode command on Page 113), the group site name is used in the site configuration. If the group site name is not specified and an automatic site is being generated, the log file name is used as the site name.

groupuse stop

N/A

Message ID = 59

Field			Data			Bytes	Format	Units	Offset
1	Header						-	-	0
2	Parameter Update, see Table 34 on Page 107					4	Enum	none	H
3	Group name					12	Char[]	none	H+4
4	Site name					32	Char[]	none	H+16
		Table 43: GROUPSITENAME Default Configuration
	Parameter		Power-On		Freset			Stored in NVM
	sitename		no change	NUL				YES

116 DL-V3 User Manual Rev 3