Novatel DL-V3 user manual Groupdef Log Group Configuration, 163

C.9 GROUPDEF Log Group Configuration

The GROUPDEF log contains configuration information for a group definition on the receiver, for the group identified by the currentgroup setting. If no valid currentgroup selection is specified, this log lists information for all groups present on the receiver.

1. This log structure is backwards-compatible with existing PDC and OEMV firmware. There are changes to this log from previous versions in fields 9, 10 and 20.

2.This log no longer contains all of the information that defines a group. A GROUPCOMCONFIG log is also needed to complement the information in the GROUPDEF log.

	Structure:	Message ID = 148
		Log Type: Polled
Field	Data		Description	Bytes	Format	Units	Offset
1	Header		Log header, see Page 149		-	-	0
2	GroupName		Group name	12	Char	-	H
3	SessionName		Session name (set to null)	8	Char	-	H+12
4	AntSN		Antenna serial number	16	Char	-	H+20
5	AntType		Antenna type	16	Char	-	H+36
6	AntHeight		Antenna height	4	Float	Metres	H+52
7	GroupEcutoff		Group elevation cut-off angle (set	4	Float	Degrees	H+56
			in the GROUPECUTOFF
			command)
8	SatLimit		Number of SV filter	4	Integer	-	H+60
9	GroupStatus1		Group Status1 word, see Table 75	4	HexUlong	-	H+64
			on Page 166
10	GroupStatus2		Group Status2 word, see Table 76	4	Ulong	-	H+68
			on Page 167
11	Lat		Latitude a	8	Double	(Degree	H+72
						s) (s)
12	Lon		Longitude a	8	Double	(Degree	H+80
						s) (s)

Continued on Page 164

DL-V3 User Manual Rev 3 163