Novatel DL-V3 Groupantheight Edit Group Antenna Height, Groupantheight Default Configuration

B.11 GROUPANTHEIGHT Edit Group Antenna Height

The groupantheight command allows you to edit the antenna height definition for the group.

The groupantheight set command sets the antenna height for the group named groupname to antheight.

The groupantheight clear command removes the antenna height setting from the group named groupname.

The groupantheight default command sets the antenna height for the group to 0.

Syntax

groupantheight set groupname [antheight] groupantheight defaultclear groupname

B.11.1 Groupuse Translation

groupuse start

The antenna height setting is reflected in the groupdef log.

If an automatic site is being generated (see groupmode), the group antenna height is used in site configuration.

groupuse stop

Not Applicable (N/A)

Message ID = 66

Field			Data	Value Used if	Bytes	Format		Units	Offset
				Not Specified
1		Header		-		-		-	0
2		Parameter Update, see Table 34		-	4	Enum		none	H
		on Page 107
3		Group name		-	12	Char[]		none	H+4
4		Antenna height, see Table 27		0	4	Float		none	H+16
		Table 27: GROUPANTHEIGHT Default Configuration
	Parameter		Power-On	Freset			Stored in NVM

antheight

no change

0

YES

DL-V3 User Manual Rev 3 97