Novatel DL-V3 user manual 122, Description Field Name Value Type

Field	Field	ASCII	Description	Field
	Name	Value		Type
1	LOG	-	This field contains the command name or the	-
	(ASCII)		message header depending on whether the
	header		command is abbreviated ASCII or ASCII
			respectively.
2	port	See Table 46,	Output port	Enum
		Detailed Serial Port	(default = THISPORT)
		Identifiers on Page
		123
3	message	Any valid message	Message name of log to output	Char [ ]
		name, with an
		optional A or B suffix.
4	trigger	ONNEW	Output when the message is updated (not	Enum
			necessarily changed)
		ONCHANGED	Output when the message is changed
		ONTIME	Output on a time interval
		ONNEXT	Output only the next message
		ONCE	Output only the current message. (default)
		ONMARK	Output when a pulse is detected on the mark
			1 input, MK1I
5	period	Any positive double	Log period (for ONTIME trigger) in seconds	Double
		value larger than the	(default = 0)
		receiver’s minimum
		raw measurement
		period
6	offset	Any positive double	Offset for period (ONTIME trigger) in seconds.	Double
		value smaller than the	If you wished to log data at 1 second after
		period.	every minute you would set the period to 60
			and the offset to 1 (default = 0)
7	hold	NOHOLD	Allow log to be removed by the UNLOGALL	Enum
			command (default)
		HOLD	Prevent log from being removed by the
			UNLOGALL command

122 DL-V3 User Manual Rev 3