Installation and Setup

Chapter 2

 

 

Figure 5: Ethernet Port

Figure 6: Bluetooth Interface at the Top of the DL-V3

5.Line up the red mark on the power cable connector with the red mark of the INPUT 9-28 V connector, see Figure 7 below, on the back of the DL-V3, and insert the power cable. See also Section 2.1.9, Applying Power to the Receiver on Page 32.

Figure 7: Power Port

6.Plug in the adapter and/or connect, turn on the power supply and press the button on the front

face of the DL-V3. The power LED on the front of the receiver glows green when the DL-V3 is turned on and is properly powered.

DL-V3 User Manual Rev 3

27

Page 27
Image 27
Novatel DL-V3 user manual Installation and Setup Chapter, Ethernet Port