Novatel DL-V3 user manual Groupanttype Edit Group Antenna Type, Groupanttype Default Configuration

B.13 GROUPANTTYPE Edit Group Antenna Type

The groupanttype command allows you to edit the antenna type definition for the group.

The groupanttype set command sets the antenna type for the group named groupname to anttype.

The groupanttype clear and the groupanttype default commands remove the antenna type setting from the group named groupname.

Syntax

groupanttype set groupname [anttype] groupanttype defaultclear groupname

B.13.1 Groupuse Translation

groupuse start

•The antenna type is reflected in the groupdef log.

If an automatic site is being generated (see groupmode on Page 113), the group antenna type is used in site configuration.

groupuse stop

N/A

Message ID = 65

Field			Data	Value Used if	Bytes	Format		Units	Offset
				Not Specified
1		Header		-		-		-	0
2		Parameter Update, see Table 34		-	4	Enum		none	H
		on Page 107
3		Group name		-	12	Char[]		none	H+4
4		Antenna type, see Table 29		NUL	16	Char[]		none	H+16
			Table 29: GROUPANTTYPE Default Configuration
	Parameter		Power-On	Freset			Stored in NVM

anttype

no change

NUL

YES

DL-V3 User Manual Rev 3 99