Novatel DL-V3 user manual Groupdgpstxid Edit Group Dgps ID Configuration

B.16 GROUPDGPSTXID Edit Group DGPS ID Configuration

The groupdgpstxid command allows you to edit the DGPS base ID configuration for the group. The group can be configured to store base ID for one DGPS message type.

The groupdgpstxid set command sets the DGPS base ID configuration for the group named groupname to type and ID (refer to the DGPSTXID command in the OEMV Family Firmware Reference Manual, for further details on type and ID).

The groupdgpstxid clear and the groupdgpstxid default commands remove the DGPS base ID configuration from the group named groupname.

Syntax

groupdgpstxid set groupname type ID groupdgpstxid defaultclear groupname

B.16.1 Groupuse Translation

groupuse start

If set, the dgpstxid command is issued.

groupuse stop

N/A

Message ID = 271

Field	Data	Bytes	Format	Units	Offset
1	Header		-	-	0
2	Parameter Update, see Table 34 on Page 107	4	Enum	none	H
3	Group name	12	Char[]	none	H+4
4	DGPS Type, see Table 73 on Page 165 and Table 33	4	Enum	none	H+16
	on Page 106
5	ID, String [max. 5] or “ANY”	5	Char[]	none	H+20
	ANY type defaults:
	RTCM - 0
	RTCMV3 - 0
	RTCA - AAAA
	CMR - 0
	The following range values are in affect:
	0 ≤ CMR ID ≤ 31
	0 ≤ RTCM ID ≤ 1023
	0 ≤ RTCMV3 ID ≤ 4095
	RTCA: any four character string containing only alpha
	(a-z) or numerical characters (0-9)
	See also Table 33 on Page 106

DL-V3 User Manual Rev 3 105