Novatel DL-V3 Siteupdatenumber Set Occupied Site Number, Siteupdatenumber Default Configuration

B.37 SITEUPDATENUMBER Set Occupied Site Number

The siteupdatenumber command allows you to configure the site number information (SiteNumber field in the sitedef log) once the site has been occupied (by issuing a site enter command).

The siteupdatenumber set command sets the site number for an occupied site to sitenumber.

The siteupdatenumber default and the siteupdatenumber clear commands clear the site number for an occupied site.

The siteupdatenumber clear command clears the site number for an occupied site.

Syntax

siteupdatenumber set [sitenumber] siteupdatenumber defaultclear

Message ID = 171

Field		Data		Value Used if		Bytes		Format	Units	Offset
				Not Specified
1	Header			-				-	-	0
2	Parameter Update, see			-		4		Enum	none	H
	Table 34 on Page 107
3	Site number			NUL		8		Char[]	none	H+4
4	Reserved for future use			NUL		12		Char[]	none	H+12
		Table 58: SITEUPDATENUMBER Default Configuration
		Parameter	Power-On		Freset		Stored in NVM

Site Number

clear

clear

NO

DL-V3 User Manual Rev 3 137