Novatel DL-V3 user manual Groupcomconfig COM Port Configuration Information, 161

C.8 GROUPCOMCONFIG COM Port Configuration Information

The groupcomconfig log contains COM port configuration information for the currentgroup specified for the receiver.

If no valid currentgroup selection is specified, this log lists COM port configurations for all groups present on the receiver.

	Structure:		Message ID = 754
			Log Type: Polled
Field		Data		Description	Bytes	Format	Units	Offset
1		Header		Log header, see Page 149	-	-	-	0
2		Group name		Group name	12	Char[ ]		H
3		# ports		Number of ports	4	Long		H+12
4		Port		Serial port identifier, see Table 67	4	Enum		H+16
				on Page 150
5		Status		Com config status word, see	4	HexUlong		H+20
				Table 72 on Page 162
6		Baud		Communication baud rate	4	ULong		H+20
7		Parity		See Table 68 on Page 150	4	Enum		H+24
8		Databits		Number of data bits	4	ULong		H+28
9		Stopbits		Number of stop bits	4	ULong		H+32
10		Handshake		See Table 69 on Page 150	4	Enum		H+36
11		Echo		When echo is on, the port is	4	Enum		H+40
				transmitting any input characters as
				they are received.
				0 = OFF
				1 = ON
12		Breaks		Breaks are turned on or off	4	Enum		H+44
				0 = OFF
				1 = ON
13		Rx_type		The status of the receive interface	4	Enum		H+48
				mode, see Table 70, Serial Port
				Interface Modes on Page 151
Continued on Page 162

DL-V3 User Manual Rev 3 161