Novatel DL-V3 user manual Parameter Update, 101

Message ID = 755

Field	Field Type	Bytes	Format	Units	Offset
1	Header	-	-		0
2	Parameter update, see Table 30	4	Enum	-	H
3	Group name	12	Char[ ]	-	H+4
4	Port to configure.	4	Enum	-	H+16
	(default = THISPORT)
	See Table 17 on Page 87
5	;Communication baud rate (bps).	4	ULong	bps	H+20
	A value of '0' indicates that no
	GROUPCOMCONFIG specification is associated
	with the port for the specified group.
	Possible bps values:
	300, 600, 900, 1200, 2400, 4800, 9600, 19200,
	38400, 57600, 115200, or 230400
6	Parity	4	Enum	-	H+24
	See Table 31 on Page 102
7	Number of data bits 7 or 8	4	ULong	-	H+28
	(default = 8)
8	Number of stop bits 1 or 2	4	ULong	-	H+32
	(default = 1)
9	Handshaking	4	Enum	-	H+36
	See Table 32 on Page 102
10	Echo	4	Enum	-	H+40
	0 = Off - No echo
	1 = On (default) - Transmit any input characters as
	they are received
11	Break	4	Enum	-	H+44
	0 = Off - Disable break detection
	1 = On (default) - Enable break detection

		Table 30: Parameter Update
Binary	ASCII		Description
0	DEFAULT		Set the parameter for a group to the default (default)
1	SET		Set parameter for a the group
2	CLEAR		Clear a parameter from the group

DL-V3 User Manual Rev 3 101