Chapter 4

DL Explorer

4.3.2Upload Group from the PC/Laptop to the Receiver

Click on the button in the main DL Explorer window and the Group Management dialog appears, see Figure 26.

Figure 26: Group Management

The Group Management dialog displays the current default group table on the PC/laptop in the CDU Groups panel on the left. The groups stored on the connected receiver are in the DL Groups panel on the right. If the receiver is not connected, or if there are no groups loaded onto the DL-V3, the DL Groups panel is empty.

Up to five groups at a time can be selected for upload from your PC/laptop to the receiver. To upload a group, highlight it in the CDU Groups panel.

Select the UpLoad button to copy the group.

Select a log group in the DL Groups panel and click on the Start button to start logging to the CF card. The Starting Groups dialog appears, see Figure 27 on Page 67. Specify the default port to use and a name for the log file. If you leave the Log Filename field empty, a sequential filename is created. If the Port field for the group is set to NO_PORTS in the Logs tab of the DL Groups dialog, see Logs Tab on Page 58-59, the Start process uses the port you select in the Starting Groups dialog. Otherwise, logs using a specific port are not affected by an entry in the Default Port field.

66

DL-V3 User Manual Rev 3

Page 66
Image 66
Novatel DL-V3 user manual Upload Group from the PC/Laptop to the Receiver, Group Management