Novatel DL-V3 user manual Methumid Specify Air Humidity, Methumid Default Configuration

B.29 METHUMID Specify Air Humidity

The methumid command allows you to specify air humidity. Humidity specified with the methumid command does not affect receiver operation. Rather, it allows you to create a record of atmospheric conditions for post-processing purposes.

The methumid set command specifies air humidity at humid. This command only stores the humidity value in volatile memory, and does not automatically generate a record. The humidity value can then be displayed/recorded by requesting the met log.

The methumid clear and the methumid default commands clear the humidity setting.

Syntax

methumid set [humid] methumid defaultclear

Message ID = 163

Field	Data	Value Used if	Bytes	Format	Units	Offset
		Not Specified
1	Header	-		-	-	0
2	Parameter Update, see	-	4	Enum	none	H
	Table 34 on Page 107
3	Humidity	0	4	Float	percent	H+4

Table 49: METHUMID Default Configuration

Parameter	Power-On	Freset	Stored in NVM
methumid	clear	clear	NO

DL-V3 User Manual Rev 3 127