Novatel DL-V3 user manual Grouplog Default Configuration, 112

For each message-logging specification, dst is added to the groupuse destination list (see the groupuse command)

Action is limited to ADD and DEL for this command.

Message ID = 64

Field		Data	Value Used if	Bytes	Format		Units	Offset
			Not Specified
1	Header		-		-		-	0
2	Action, see Table 25 on Page 96		-	4	Enum		none	H
3	Group name		-	12	Char[]		none	H+4
4	Serial Port Identifier, see Table 67		NO_PORT	4	Enum		none	H+16
	on Page 150
5	Message ID		-	4	Ulong		none	H+20
6	Trigger (see the LOG command in		ONCE	4	Enum		none	H+24
	the OEMV Family Firmware
7	Period		0	4	Float		seconds	H+28
		Table 38: GROUPLOG Default Configuration
	Parameter	Power-On	Freset			Stored in NVM

Log configuration

no change

See Section B.10.1, Factory-Reset DEFAULT Group on Page 96

YES

112 DL-V3 User Manual Rev 3