3.Connect the power cable to the DL-V3 and power-up the unit

D.2.2 Enable Ethernet on the DL-V3 Receiver

From the laptop, connect the DL-V3 to a serial, or USB, cable. Open communication with the receiver using HyperTerminal or CDU. Issue the following command (to switch COM3 from Bluetooth to Ethernet operation):

APPCONTROL BLUETOOTH 1

COM3 switches from the Bluetooth to the Ethernet device in the DL-V3. You can see this because the

Ethernet LED, labelled , on the DL-V3 glows orange.

D.2.3 Windows XP Network Settings

If using TCP/IP networking on a Windows XP-based PC/laptop, Windows may be configured to obtain an IP address automatically. However, an alternate IP must be configured manually rather than having an automatically generated private IP address. To do this, follow these steps:

1.Click on the Start button in Windows and select Settings Control Panel.

2.Select Network Connections in Control Panel, and double-click on it.

180

DL-V3 User Manual Rev 3

Page 180
Image 180
Novatel user manual Enable Ethernet on the DL-V3 Receiver, 180