Novatel DL-V3 user manual COM1/COM2 Interface Modes, Dgps Type Description Binary

	Field	Data	Description	Bytes	Format	Units	Offset
28		Port	Serial port identifier, see Table 67	4	Enum	-	H+180
			on Page 150.
29		Reserved for future use		4	Float	-	H+184
30				2	Ushort	-	H+188
31				1	Uchar	-	H+190
32				1	Uchar	-	H+191
		Next Log Spec Offset = H + 168 + (N * 24)

a.A Group Status1(field 9) output of Position Average Enable indicates that these GROUPDEFB fields are used to represent averaging options. Analogously, a Group Status1 output of Position Fix Enable indicates that fields represent the fixed position itself.

Table 73: DGPS Type

DGPS Type		Description
Binary	ASCII
0	RTCM	RTCM ID Type
1	RTCA	RTCA ID Type
2	CMR	CMR ID Type
10	AUTO	Automatic type

	Table 74: COM1/COM2 Interface Modes
Value		Description
0x0000 00FF	COM1 Rx interface mode. The 1-byte binary value corresponds to the
	enumerated Serial Port Interface Modes table. a
0x0000 FF00	COM1 Tx interface mode. The 1-byte binary value corresponds to the
	enumerated Serial Port Interface Modes table. a
0x00FF 0000	COM2 Rx interface mode. The 1-byte binary value corresponds to the
	enumerated Serial Port Interface Modes table. a
0xFF00 0000	COM2 Tx interface mode. The 1-byte binary value corresponds to the
	enumerated Serial Port Interface Modes table. a

a.Refer to the INTERFACEMODE command in the OEMV Family Firmware Reference Manual

DL-V3 User Manual Rev 3 165