Novatel user manual DL-V3 Commands in Order of their Message IDs

Message ID	ASCII Command	Description
1	log	Request logs from the receiver
157	logfile	Manual file logging control
163	methumid	Specify air humidity
164	metpress	Specify air pressure
165	mettemp	Specify ambient temperature
211	project	Project-related parameters
201	rename	Rename a file stored in the CF Card
18	reset	Perform a hardware reset
212	satlimit	Specify the minimum number of satellites to use in the
		position solution
166	site	Control site occupations
167	siteupdateantheight	Configure occupied site’s antenna height information
168	siteupdateanttype	Configure site antenna type information for an occupied site
169	siteupdateattribute	Configure site attribute information for an occupied site
170	siteupdatename	Configure site name information for an occupied site
171	siteupdatenumber	Configure site number information for an occupied site
213	softpower	Power-button OFF simulation
257	write	Create logs containing user data
204	writefile	Create files or append data to an existing file on the CF Card
		where the data format is char
240	writefilehex	Create files or append data to an existing file on the CF Card
		where the data format is hexbytes
205	writehex	Create logs containing user data

Table 14: DL-V3 Commands in Order of their Message IDs

Message ID	ASCII Command	Description
1	log	Request logs from the receiver
18	reset	Perform a hardware reset
20	freset	Factory reset
53	del	Delete files from the CF Card
54	group	Modify log group definitions
55	groupantsn	Edit the serial number for the group
56	groupecutoff	Edit the elevation cut-off configuration for the group

Continued on Page 83

82 DL-V3 User Manual Rev 3