Novatel DL-V3 Siteupdatename Set Occupied Site Name, Siteupdatename Default Configuration

B.38 SITEUPDATENAME Set Occupied Site Name

The siteupdatename command allows you to configure the site name information (SiteName field in the sitedef log) once the site has been occupied (by issuing a site enter command).

The siteupdatename set command sets the site name for an occupied site to sitename.

The siteupdatename default command sets the name to “SITE”.

The siteupdatename clear command has no effect.

Syntax

siteupdatename set sitename siteupdatename defaultclear

Message ID = 170

Field	Data	Value Used if	Bytes	Format	Units	Offset
		Not Specified
1	Header	-		-	-	0
2	Parameter Update, see	-	4	Enum	none	H
	Table 34 on Page 107
3	Site name	-	32	Char[]	none	H+4
4	Reserved for future use	NUL	12	Char[]	none	H+36

Table 59: SITEUPDATENAME Default Configuration

Parameter	Power-On	Freset	Stored in NVM
Site Name	clear	clear	NO

138 DL-V3 User Manual Rev 3