Muratec MFX-1500E What you see on the LCD What it means/What to do, Protection, Ment codes, One

What you see on the LCD	What it means/What to do
Communication Error	A communication error disrupted the reception
	or transmission. If you were transmitting, press
	STOP to clear the error message and then re-try
	the transmission. If you were receiving a fax, try
	to contact the other person and have him/her re-
	try the transmission. (The problem may be
	entirely with his/her machine, phone line, etc.)
Copy Off	You tried to use your fax machine to make a
	copy, but the unit’s copy protection feature (page
	1.31) is on, preventing such use. Turn off copy
	protection.
Copying Not Completed	You tried to switch to the fax mode by pressing
	COPY/FAX during copying from the multi paper
	tray. Complete the copying first, then try again.
Dept. Code Full	You tried to enter department code more than
	100. Your machine can store up to 100 depart-
	ment codes.
Document Full	You tried to enter an document into an F-Code
	box, but the machine has reached its capacity.
	Delete documents stored in F-Code boxes until
	the machine will let you proceed.
Document Jam	An original document jam while you are using
ContStor Enter/Cancl	the ADF for either faxing or copying. See page 3.1
	for instructions on clearing the jam.
Document Stored	You tried to erase a batch box which contains at
	least one document. Erase the document(s), then
	try again.
Drum Near End	Your drum will need to be replaced soon.
	Press STOP to clear the message, then contact
	your authorized Muratec dealer to purchase a
	new drum cartridge if you don’t already have
	one.
Enter No. (0-32)	You tried to enter a call group number greater
	than 32. Your machine can maintain 32 call
	groups, numbered 1-32 (call group 0 covers all
	the groups). Determine the correct call group
	identifier number and enter it, instead.

	Just in case …
What you see on the LCD	What it means/What to do
Enter No. (1-99)	You tried to request greater than 99 copies from
	your fax, which can create 1-99 copies of a docu-
	ment. Select the correct quantity and enter it.
Enter Scan Size	When you using the flatbed scanner (FBS), you
	must manually enter the scan size of your docu-
	ment. Press BOOK DOC SIZE to choose the size.
Feeder In Use	The command you’re trying to enter requires the
	use of the ADF, which is already in use. Wait for
	the machine to stop using the ADF, then try
	again.
Hang Up Phone	The optional handset is off-hook.
	Hang it up, making sure the upper part of the
	handset presses down on the “hook” button.
In Relay Box	You tried to store a document for polling in an
	F-Code box which is set to be a relay box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
In Secure Box	You tried to store a document for polling in an
	F-Code box which is set to be a security box.
	Select an F-Code box which is set to be a bulletin
	box, then try again.
Insert Document	There was no document in the document feeder
	when you tried to send a fax or make a copy.
	Place a document and try again.
Invalid I.D. Code	The F-Code box I.D. code you entered isn’t valid.
	Try re-entering your F-Code box I.D. code.
Invalid Number	You pressed a key which has no function during
	the current operation.
Invalid Passcode	The protection passcode you entered isn’t valid.
	Repeat the operation, entering the correct protec-
	tion passcode.
Line Busy	You tried to erase a document which someone is
	polling from your machine. Wait for the fax to
	complete the polling operation, then try again.

3.7