Muratec MFX-1500E, Series 41500E operating instructions Macros, Copy

1

Select Macro Key M1:No Number Stored

2 Press the Macro key (MACRO 1 – MACRO 3) you want to program or change. In this example, we’ve chosen MACRO 2.

Select Macro Key M2:No Number Stored

3 Press ENTER. If you chose the key already programmed, proceed to step 4. Otherwise, skip to step 5.

4 The LCD shows:

Overwrite?

Check Program/Enter

If you want to overwrite the operation already programmed, press ENTER.

If you want to overwrite only the job’s name, press PROGRAM and go to step 9. If you do not want to overwrite the key you have choiced, press STOP.

5 The LCD of stand-by mode appears, which means the machine is ready to reg- ister the steps into the Macro key.

Fax Ready

Jan 11 2000 13:30

Press MACRO PROGRAM, ENTER. The LCD shows:

Programming the Macro key

Communications functions:

Macros

In order to complete some operations on your machine, you may have to follow sev- eral steps and press several different buttons. But programming your machine’s Macro keys (MACRO 1 – MACRO 3) can reduce those many steps to a simple press of a key. You can “teach” the Macro keys to carry out any of the following jobs:

Note: One Macro key can hold only one job. It cannot combine two or more jobs.

Copy:

•Copy settings (Number of copies, Paper size, Sort on/off, Resolution, Contrast and Enlargement/Reduction) (pages 1.28–1.29)

Printouts:

•One-touch numbers list (pages 2.11)

•Speed-dial numbers list (pages 2.14)

•Programmable one-touch numbers list (pages 2.55)

•Delayed commands list (pages 2.19)

•Activity journal (pages 2.29)

•Call group directory (pages 2.14)

•Machine settings list (pages 2.6)

•Sample cover page (pages 2.28)

•Department time list (pages 2.63)

•Batch box list (pages 2.21)

•List of stored batch documents (pages 2.21)

•List of transfer pattern (pages 2.37)

•List of F-Code boxes (pages 2.42)

•List of documents stored in F-Code boxes (pages 2.42)

•Stored polling documents (pages 2.33)

•Delayed commands documents (pages 2.19)

•Security receive documents (pages 2.57)

•Batch transmission documents (pages 2.21)

•F-Code Box (bulletin box) documents (pages 2.43)

Document storage:

•Regular polling documents (pages 2.31)

•F-Code polling documents (pages 2.42)

Beyond the Basics

•Delayed transmission (explained on pages 2.17–2.19)

•Regular polling (page 2.31)

•Continuous polling (pages 2.32)

•Batch transmission (pages 2.20–2.23)

•F-Code transmission (pages 2.46–2.47)

•F-Code polling (page 2.47)

Note: It keeps beeping during the job registration in order to make notice of the registration mode.

2.25