Muratec MFX-1500E Setting of enlargement or reduction for copying, Copy Protect Complete

Copy protection

With such a versatile copier built right into your fax machine, you might want to make sure it doesn’t become too tempting to some people whose unauthorized copy- ing could deplete your machine’s supplies more rapidly. So, to limit the use of your fax machine to only sending and receiving faxes — in other words, to activate copy protection:

1 If the machine is in Fax mode, skip to step 2. Otherwise, press COPY/FAX to change to Fax mode.

2 Press PROGRAM, J, 0, 3, ENTER.

Copy Protect :Off Program/Enter

Press ENTER

4

Press PROGRAM to turn on copy protection.

Copy Protect :On Program/Enter

3

Setting of enlargement or reduction for copying

Your fax machine is capable of enlargement and reduction when copying.

Note: The copy enlargement and reduction rate setting is available only for copy- ing, not for faxing.

Important: Copy enlargement is available only for copying using the FBS; it is not available for copying using the ADF.

To change the reduction or enlargement rate for copying, either select a preset rate or directly enter a rate.

Selecting a preset rate

Either . . .

•Press ENLARGE to select one of the following fixed enlargement rates.

200%

129% : Half-letter (5.5″ × 8.5″) → Letter (8.5″ × 11″) 100%

. . . or . . .

•Press REDUCE to select one of the following fixed reduction rates. 78%: Legal → Letter

64%: Ledger (11″ × 17″) → Letter (8.5″ × 11″)

Directly entering a rate

Using the numeric keypad, directly enter the reduction or enlargement rate by doing one of the following.

Either . . .

1	Press #.
2	Enter your desired rate using the numeric keypad. You can set any rate from
	50% reduction through 200% enlargement.
3	Press # again.

. . . or . . .

Press or to adjust the rate, at 1% intervals, from/including 50% reduction through 200% enlargement.

Getting started

Copy Protect

** Complete **

While this setting is active, whenever someone tries to change the machine to Copy mode, the machine will sound a brief alarm tone and display:

Fax Ready

Copy Off

Important: To turn off copy protection off so that you can again use the machine’s copying function, repeat steps 2-4, above (step 1 is unnecessary since the machine will be in Fax mode) except that, in step 3, you press PROGRAM so that the display shows:

Copy Protect :Off

Program/Enter

1.31