Muratec MFX-1500E, Series 41500E Fax mode, Or, in Copy mode, While scanning a document

11	START — Press to begin a fax transmission or reception.
12	CLEAR ALL — Resets copying settings to their defaults.
13	STOP — An all-purpose “Whoa!” key. Stops the current operation and ejects a
	document from the document feeder.
14	BROADCAST — Press to send a broadcast fax (sending the same document to
	more than one location).
15	BOOK DOC SIZE — Instructs the fax to scan either letter- or legal-sized docu-
	ments when you use the flatbed scanner.
16	SPEED DIAL/TEL INDEX — Starts a speed-dialingoperation, which you finish by
	pushing three of the keys on the numeric keypad. Also displays one-touchand
	speed-dial entries sorted alphanumerically, as in a telephone directory.
17	CANCEL — Press to delete characters on the LCD and cancel commands you
	have entered into the machine.
18	In Fax mode:
	REDIAL/PAUSE — Redials the last number you dialed. In certain operations, it
	also produces a special pause character which can be useful when dialing
	long-distance numbers.
	Or, in Copy mode:
	PAPER SIZE? — Selects the printout paper you want to use.
19	ENTER — Much as STOP is a “Whoa!” key, ENTER is a “Go!” key. It confirms user
	settings, begins operations and moves through command levels.
20	In Fax mode:
	DIALING OPTIONS — Press this to insert special symbols into telephone num-
	bers (see page 2.7).
	Or, in Copy mode:
	SORT COPY — Press this key to toggle the sorting of printed copies.
21	In Fax mode:
	/PROGRAM — Scrolls (moves) through features and command options as dis-
	played on the LCD.
	Or, in Copy mode:
	Press to increase the reduction or enlargement rate at 1% intervals.
22	In Fax mode:
	GROUP DIAL — Press this to set up a fax transmission to a call group, a set of

fax numbers which will receive the same document in one fax operation.

Or, in Copy mode:

ENLARGE% — Press this key to choose one of several fixed copy enlargement rates. (See page 1.31 for more information.)

		Getting started
23	In Fax mode:
	— Scrolls (moves) through features and command options as displayed on
	the LCD.
	Or, in Copy mode:
	Press to decrease the reduction or enlargement rate at 1% interval.
	While scanning a document:
	NEXT — Press to tell your machine to scan one or more additional documents
	after the current scanning ends.
24	In Fax mode:
	COMMUNICATION OPTIONS — Chooses from among several fax options: delayed
	transmission, SecureMail transmission, relay broadcast, polling, batch trans-
	mission or F-Code communication.
	Or, in Copy mode:
	REDUCE% — Press this key to choose one of several preset copy reduction
	rates. (See page 1.31 for more information.)
25	RESOLUTION — Press to toggle among the three resolution modes and
	grayscale.
26	CONTRAST — Press to enter the contrast setting mode. To change the contrast
	level, press or keys.
27	COPY/FAX — Press this key to toggle between Fax mode or Copy mode.

1.5