Muratec MFX-1500E, Series 41500E Code polling, Enter Sub-Address 123456, Enter Password 654321

13 Press START.

If in step 10 you chose an immediate transmission, your fax machine begins dialing. If you chose a delayed command, the machine shows “Reserved” on the LCD, indicat- ing that it has stored the command in memory and will complete it later.

F-Code polling

1	Press COM-OPTIONSfive times and then press ENTER.
		Enter Sub-Address
		_
2
	Use the numeric keypad to enter the appropriate sub-address.
	In this example, we’ve entered 123456.
		Enter Sub-Address
		123456_
	Note: If you make a mistake, press CANCEL to erase the character, then
		enter the correct number.
3	Press ENTER. The LCD shows:
		Enter Password
		_
	Note: If this sub-address does not have a password, skip to step 5.
4	Use the numeric keypad to enter the password. In this example, we’ve
	entered 654321.
		Enter Password
		654321_
5
	Press ENTER. The LCD shows:
		Enter Fax Number
		_
6
	Enter the fax number either by pressing a one-touch key, entering a speed-
	dial number or dialing from the numeric keypad. Do not press START.
7	What you do now depends upon when you want the polling to begin.
	• To have it begin now, skip to step 10.

• To delay it, go on to step 8.

Beyond the Basics

8 Press COM-OPTIONS, ENTER. The LCD shows:

Delayed

Enter Time: 15/17:05

9 Use the numeric keypad to enter the day and time when the polling should begin, then press ENTER.

10 Press START.

If in step 7 you chose an immediate polling, your fax machine begins dialing. If you chose a delayed command, the machine shows “Reserved” on the LCD, indicating that it has stored the command in memory and will complete it later.

2.47