Muratec Series 41500E M2Macro Name Lower, M2Macro Name Upper M2Macro Name Upper Delayed

Example 2: To program the operations for printing the one-touch numbers

list: Press /PROGRAM, A, 3, ENTER.

7 If you programmed ENTER or START into the operation, proceed to step 8. Otherwise, press MACRO PROGRAM and skip to step 9.

8 If you want to start immediately after pressing the Macro key when you use it, press ENTER. If not, press /PROGRAM.

Beyond the Basics

6 Press the keys exactly as you operate the job you want to program into the Macro key.

Note: You can program up to 60 steps. When it comes over 60 steps, your fax machine asks if you register the operations you have entered. If you want to register them, press ENTER. If not, press STOP.

Note: If you want to cancel the operations you have set, press

MACRO PROGRAM, STOP and then go back to step 1.

Example 1: To program some operations for copy: Press COPY/FAX, and set number of the copies, paper size, contrast, resolution, reduction/enlargement rate and sort setting as you want.

Note: See “Making copies” (pages 1.28–1.31) for detail operations.

Note: If you want to confirm the settings or operations in the Macro key before you start it, press /PROGRAM here.

To enter a lower-case letter, press ALPHABET. The display will change to:

M2:Macro Name ;Lower

_

This means pressing one-touch keys will enter lower-case letters: pressing R will produce an r (not an R) on the display.

To switch back for upper-case entries, press ALPHABET.

Use the one-touch keypad to enter spaces, punctuation and symbols.

You can also use the CODE function to enter characters. Please review the explanation on page 2.2, if necessary.

	Note: To erase characters, press CANCEL to erase to the left.
	To change just one character in the name, press to move the cursor
	left, or /PROGRAM to move it right. Press CANCEL to erase it. Then re-
	enter the name correctly.
11	Press ENTER to save the setting.
	To program or modify another job, repeat steps 2–11. To finish, press STOP.

Copying with the Macro key

To copy using a Macro key:

Include Start/Enter Check Program/Enter

9 The LCD now displays:

M2:Macro Name ;Upper

_

or

M2:Macro Name ;Upper Delayed_

1 Insert the document.

2 Press the Macro key in which you’ve stored the copy command.

3 Press START, if you have not registered START in the Macro key.

Printing lists using the Macro key

	The machine now asks you to name this job.
	If you do not want to enter or change this job’s name, skip to step 11.
10		Enter the name the same way you entered your fax name during EasyStart.
	A job’s name may be up to 130 characters in length.
	Important: As in EasyStart, enter letters and other non-numeric characters
		by using the one-touch keys.
		M2:Macro Name ;Upper
		_
	The word “Upper” means the machine is currently set for entering only upper-
	case letters. If you press R, the machine will see it as an R (not an r).

To print a list using a Macro key:

Press the Macro key in which you’ve stored the list operation you want to print.

Storing fax documents with the Macro key

To store a fax document for either polling or F-Code polling using a Macro key:

1 Insert the document.

2 Press the Macro key which is programmed for the storing operation you want to use.

3 Press ENTER, if you have not registered ENTER in the Macro key.

2.26