Muratec Series 41500E Daylight SavingOn Program/Enter, Your Fax Number, Your Name Upper

Getting started

5	Press or /PROGRAM until the mode you want appears.
	Here, we’ve changed the setting to On:
			Daylight Saving:On
				Program/Enter
6
	Press ENTER to save the setting and continue.
7	The LCD now asks you to enter your fax number as you want it to appear on
	other fax machines’ displays or printouts. The fax industry term for this
	number is Subscriber ID.
			Your Fax Number
8
	Use the numeric keypad to enter the fax number. To insert a dash, as shown
	here, press DIALING OPTIONS once. The number may contain up to 20
	characters (numbers and dashes).
			Your Fax Number
		972-555-5525
	Note: If you make a mistake, press CANCEL to erase to the left.
				To change just one number, press to move left, or /PROGRAM to
				move right. Press CANCEL to erase the number. Then re-enter the fax
				number correctly.
9	Press ENTER to save the number.
10	The LCD now asks you to enter the name you want to appear at the top of
	faxes you send. The name may be up to 22 characters in length.
	Use the one-touch keys to enter letters and other non-numeric characters.
			Your Name		;Upper
		_
	The word “Upper” means the machine will enter only upper-case letters. If
	you press R, the machine will see it as an R (not an r).
	To type a lower-case letter, press ALPHABET. The display changes to:
			Your Name		;Lower
		_

This means pressing one-touch keys will enter lower-case letters: pressing R will produce an r (not an R) on the display.

To switch back for upper-case entries, press ALPHABET.

	To enter spaces, punctuation and symbols, use the one-touch keys.
	In “Beyond the Basics,” we’ll show you how to use the CODE function to enter
	even more characters (see page 2.2).
	Note: If you make a mistake, press CANCEL to erase to the left.
		To change just one character in the name, press to move left, or
		/PROGRAM, to move right. Press CANCEL to erase the character. Then
		re-enter the character correctly.
11	Press ENTER to save the setting and continue.
12	The LCD now asks you to enter the type of dialing needed for the fax machine,
	either tone or pulse:
		Phone Type	:Tone
		Program/Enter
13
	Press or /PROGRAM until the mode you want appears.
	Here, we’ve changed the setting to Pulse mode:
		Phone Type	:Pulse
		Program/Enter
14
	Press ENTER to save the setting and continue.
15	The LCD now shows the machine’s current reception mode.
		Fax Ready
		Program/Enter
16
	For now, press or		/PROGRAM until the setting Fax Ready appears. (This
	setting can always be changed. We’ll discuss reception modes further on pages
	1.24–1.27.)
17	Press ENTER to save the setting. Your machine will return to standby mode.

EasyStart is complete!

1.16