Muratec MFX-1500E, Series 41500E Programming a broadcast / group, Delayed Enter Time 30/1705

7 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

8 Press ENTER, ENTER.

9 The LCD now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press STOP. Your machine returns to standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

Programming a broadcast / group

Programming a broadcast is very similar to programming a delayed transmission. But instead of sending to just one phone number, you set up multiple numbers for the transmission.

To program a broadcast / group into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable
	one-touch number available:

Select Program No. 73:No Number Stored

Note: If a programmable one-touch number other than 73 appears on the LCD, it means that you have already entered a number for 73.

Note: To erase a programmable one-touch key, see pages 2.54–2.55.

Beyond the Basics

2 Press the key you want to program or change. Here, we’ve selected 75.

Select Program No. 75:No Number Stored

Note: If your previous command for this key was for a broadcast / group transmission and you want to keep this key programmed for a broad- cast / group transmission, use these instructions to make changes. But if you want to assign this key to a completely different operation (for a delayed transmission, for example), then you first must erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER. The LCD now shows either

75:Fax#/Com-Options	or	75:Fax#/Com-Options
_		9-5558743_

5 Use the numeric keypad to enter up to 230 fax numbers — you can use any combination of call groups, one-touch keys, speed-dial numbers and manually- dialed numbers.

Important: Do not press ENTER.

Press BROADCAST to enter a comma between each number or call group.

Important: Do not insert a comma after the last number.

To enter a speed-dial number, press SPEED DIAL/TEL INDEX and the number’s three-digit identifier.

To enter a call group, press GROUP DIAL and the group’s identifier number.

75:Fax#/Com-Options G5,G7,[01],S006,9-55

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or /PROGRAM to scroll to the right.

Note: To erase characters, press CANCEL to erase to the left.

To change just one character in the number, press to move the cur- sor left, or /PROGRAM to move it right. Press CANCEL to erase it. Then re-enter until the number correctly.

6 If you want the broadcast to begin immediately every time you press the key, press ENTER and skip to step 9.

If you want to delay the broadcast, press COM-OPTIONS,ENTER.

2.49