Muratec MFX-1500E How to copy, Sort copy, Copying using the ADF, When using the FBS

Sort copy

Press SORT COPY to toggle (switch on or off) sorting copy if necessary. The initial set- ting is Off.

How to copy

Copying using the ADF

1	If necessary, press COPY/FAX to change to Copy mode.
	Otherwise, proceed to step 2.
2	Prepare the document just as you would to send a fax.
	Note: There are certain types of documents you never should insert into
	your fax machine. (You might wish to review “Things NOT to put in
	your fax,” page 1.17.)
3	Insert your document face up. Adjust the document guides for a correct fit.
	When the document is correctly inserted, you’ll hear a short beep.
	Note: Make sure that all the pages are the same size and thickness.
	Do not attempt to feed documents of different size and thickness in
	the same stack.
4	Adjust resolution and contrast if necessary.
	Press RESOLUTION to change the resolution.
	Press CONTRAST, then press or to change the contrast.
5	Set the reduction rate, if you want. (See “Setting of enlargement or reduction
	for copying,” page 1.31.)
6	If you want to make only one copy of each page of the document, skip to step
	9. Otherwise, proceed to step 7.

Getting started

7 Use the numeric keypad to enter the desired number of copies for each page in the document. You may choose one to 99 copies. Here, we’ve entered “3” to choose a setting of three copies.

8	Press SORT COPY once or twice to “toggle” (switch on or off) the sorting of
	copies, as desired.
9	Press START to begin the copying process.

Note: To stop the copying before it is through, press STOP.

Note: Thanks to your machine’s QuardAccess® feature (see page 2.37 for more), copying doesn’t keep you incommunicado while in progress: you can start a fax or voice call and even receive a voice call during copying.

When using the FBS

1 If necessary, press COPY/FAX to change to Copy mode. Otherwise, proceed to step 2.

2 Open the book-cover, place your document face down on the FBS and align it with the scale on the right.

Note: Be sure that you place the original document on the FBS in the same orientation as the paper in the paper source (which you’ll select in step 4).

3 Gently close the book-cover.

4 Press PAPER SIZE? to select recording paper (see page 1.28).

1.29