Muratec MFX-1500E, Series 41500E operating instructions Setting the confirmation stamp

5	Press ENTER to save the setting. The LCD now asks if you want the alarm turned
	on or off:
		Alarm Silent			:Off
				Program/Enter
6
	Press		or	/PROGRAM until the mode you want appears.
	If you want to turn off the alarm, select “On” and the machine will be quiet.
	Otherwise, the machine will beep.
7	Press ENTER to save the setting. The LCD now asks if you want the key tones on
	or off:
		Key Buz.Silent :Off
				Program/Enter
8
	Press		or	/PROGRAM until the mode you want appears.
	If you want to turn off the tones, select “On” and the machine will be quiet.
	Otherwise, the machine will beep when the keys are pressed.
9	Press ENTER to save the setting.
	If you turned off the alarm or the key tones in the steps above, your machine
	gives you the option of setting the volume for the alarm and key tones. If this
	option appears, skip to step 10.
	If you didn’t turn any of these off, your fax machine returns to standby mode.
10	The LCD shows your fax’s current setting:
		Alarm&Key Vol. :Mid
				Program/Enter
11
	Press		or	/PROGRAM until the mode you want appears.
	Below are the possible settings:

Beyond the Basics

Setting the confirmation stamp

You can set your fax machine so that it will automatically place a smallblue ink stamp mark on the front of each original document that it successfully scans.

Important: Turn off this feature if you’re sending documents you don’t want the fax to stamp.

1	Press		/PROGRAM, J, 1, 4, ENTER. The LCD shows your fax’s current setting:
		Stamp		:Off
				Program/Enter
2
	Press		or	/PROGRAM until the mode you want appears.
	In this example, we’ve chosen On.
		Stamp		:On
				Program/Enter
3
	Press ENTER to save the setting.

Alarm&Key Vol. :Max Program/Enter

Alarm&Key Vol. :Mid Program/Enter

Alarm&Key Vol. :Min Program/Enter

12 Press ENTER to save the setting.

=Loudest setting.

=Medium setting.

=Low setting.

2.5