Muratec Series 41500E Reviewing or canceling delayed commands, C019-5552311 Program/Cancel

Beyond the Basics

Reviewing or canceling delayed commands

If you’ve stored a delayed command in your fax machine, it will hold it in memory until it either completes the command successfully or reaches its maximum number of redial attempts (see page 1.22). Your machine can store up to 99 delayed com- mands. It identifies each by a two-digit command number ranging from 01 to 99.

To see your machine’s stored commands or to cancel them:

1 Press REVIEW COMMANDS.

•If there are no stored commands in your machine — It beeps briefly and displays “No Command” on the LCD. It then returns to standby mode.

•If there are commands in your machine’s memory, the LCD shows:

C01:9-5552311

Program/Cancel

Here, you see command 01, followed by the number it’s set to dial. If the com- mand is to send a broadcast, “Broadcast” appears instead of the phone number. (See “Broadcasting,” page 2.16.)

If the command is to send a batch transmission, the LCD shows its batch box number (such as “B01”) rather than the command number. (See “Batch trans- mission,” pages 2.20–2.23.)

If the command is for a continuous polling operation, the LCD shows its contin- uous polling operation number (such as “P01”) rather than the command number. (See “Polling,” on pages 2.31–2.33.)

Note: If your machine is attempting to perform a command now, it appears on the display.

2 Press /PROGRAM or to scroll through currently stored commands.

3 If you want to cancel the command shown, press CANCEL. The LCD shows:

C01:9-5552311

Check Program/Cancel

4 To keep this command but to continue reviewing stored commands, press

/PROGRAM. Go back to step 2.

To keep this command and stop reviewing commands, press STOP to return your machine to standby mode.

To go ahead with cancelling the command, press CANCEL again. Go back to step 2 to view other delayed commands.

Note: See also “Reviewing or cancelling parts of a broadcast,” next column.

Reviewing or cancelling parts of a broadcast

You also can review or cancel certain numbers within a broadcast:

1	Press REVIEW COMMANDS.
2	Press		/PROGRAM or	to scroll through currently stored commands.
	Note: Stop this operation at any time by pressing STOP.
3	If you want to cancel the command shown, press CANCEL, CANCEL.
	If you want to review individual numbers within this broadcast, go on to
	step 4 without pressing CANCEL.
4	To review individual numbers within this broadcast, press BROADCAST to see
	the first number. The LCD shows:
		9-5550388
			Program/Cancel
5
	Press		/PROGRAM or	until you find the number you want to cancel.
6	Press CANCEL, CANCEL. The next number will appear.
	If you want to cancel this number, also, repeat this step.

If you want to cancel a different number, go back to step 5.

If you don’t want to cancel any more numbers, press STOP. The machine returns to standby mode.

2.18