Muratec Series 41500E PIN Mode Mode1 Program/Enter, Set PIN Number Enter Passcode, 001PIN Number

Beyond the Basics
4	Press or /PROGRAM until the mode you want appears. In this example,
	we’ve chosen “Mode1.”
		PIN Mode		:Mode1
			Program/Enter
5
	Press ENTER.

Autodialing while using the PIN mask

Note: The following instructions presume you understand how to set and use your machine’s autodialer. If you need to review, see pages 2.7–2.15.

If you chose “Mode 1” — the PIN goes in

In Mode 1, before autodialing a number for the first time, you must add the PIN to the stored one-touch key or speed-dial number. Here’s how:

1	Begin by creating or changing an entry in the autodialer. See pages 2.7–2.15
	if necessary. While you’re setting this up, the machine asks you to enter the
	PIN. The LCD shows:
		Set PIN Number
		Enter Passcode :****
2
	Use the numeric keypad to enter the four-digit passcode. Here, we’ll use our
	sample passcode again.
		Set PIN Number
		Enter Passcode :6296
3
	Press ENTER. In our example, we’re setting speed-dial number 001:
		001:PIN Number
		_
4
	Use the numeric keypad to enter the desired PIN, up to eight characters in
	length.
		001:PIN Number
		1057_
5
	Press ENTER to save the PIN.
	Note: If you press ENTER without entering the PIN, the fax machine beeps,
		indicates “Invalid Number” on the LCD and then returns to step 4.

Now you may autodial the number as usual.

Important: While in PIN Mode 1, any autodialer numbers you use must include the PIN. This also applies to autodialer numbers used with batch transmission (see pages 2.20–2.23) or programmable one-touch keys (see pages 2.48–2.55).

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission, you must store the PIN access code for the remote unit within the appropri- ate batch box.

If you chose “Mode 2” — as you autodial, load the code

In this mode, you don’t have to add the PIN to the autodialer setting. Instead, you enter the PIN manually each time you autodial:

1 Dial the number as you normally would, using the autodialer. Here, we’ve pushed one-touch key A. The machine now asks for the PIN:

Enter PIN Number

_

2 Use the numeric keypad to enter the PIN.

Enter PIN Number 1057_

3 Press START. Your machine dials the number.

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see pages 2.20–2.23), you must store the PIN access code for the remote unit within the appropriate batch box.

Dialing from the numeric keypad while using the PIN mask

If you’ve specified Mode 1 — use “star” power

1 Enter the phone number, then press the * (“star”) key and enter the PIN.

The PIN always goes last. For example, to dial 19725550911 with a PIN of “123456”, enter 19725550911*123456:

Press Start 19725550911*123456

2 Press START. The PIN disappears from the display, and your machine dials the desired phone number.

2.58