Muratec MFX-1500E, Series 41500E Review Commands, an introduction, C015552009 Program/Cancel

Getting started

Review Commands, an introduction

Your fax machine can store many “jobs” in its memory. And it keeps track of each one by assigning it a command number, like “C01.”

Delayed commands, redial attempts and current fax transmissions are all stored in your fax machine’s memory and given a command number.

The Review Commands function gives you the power to check on each job (or command) in your machine’s memory. It also lets you cancel a command if you decide not to send the document.

To cancel a command:

1	Press REVIEW COMMANDS.
	The LCD shows the first command, indicated by its command number and the
	phone number it will dial. If a command is in progress, that will be the first
	command the LCD shows:
		C01:5552009
		Program/Cancel
2
	Press or /PROGRAM until the command you want to cancel appears.
3	Press CANCEL. The LCD shows:
		C01:5552009
		Check Program/Cancel
4
	If you want to cancel this command, press CANCEL again.
5	The LCD now shows the next command.
	If you want to cancel it, too, go back to step 4.

If you don’t want to cancel this command but do want to review other commands, press /PROGRAM until the command you want appears. Then go back to step 4.

If you want to stop reviewing the stored commands, press STOP to return the machine to standby mode.

For more information on the Review Commands function, see page 2.18.

1.23