Muratec MFX-1500E Select Macro Key M1Activity journal, Select Macro Key M2Batch box list

Fax dialing with the Macro key

To dial a fax call using a Macro key:

1 Insert the document.

2 Press the Macro key in which you’ve stored the fax communication command.

3 Press START, if you have not registered START in the Macro key.

Your fax will perform the operation now, or at whatever time you programmed. If you programmed this key to delay its operation, the LCD shows:

** Reserved ** Jan 29 2000 17:17

If you programmed this key to perform the operation immediately after you press it, the LCD shows the number:

9-1-972-555-4335

A4 Normal

Erasing a Macro key

1 Press MACRO PROGRAM twice, ENTER. The LCD shows:

Select Macro Key

M1:Activity journal

2 Press the Macro key (MACRO 1 – MACRO 3) you want to erase. Here, we’ve cho-

sen MACRO 2.

Select Macro Key

M2:Batch box list

3 Press ENTER. The LCD shows:

Erase Macro

Check Program/Enter

Important: If you want to quit without erasing the Macro key you’ve selected, press /PROGRAM. The fax will return to step 2.

4 Press ENTER to erase the job.

Erase Macro

** Complete **

Beyond the Basics

To erase another Macro key, repeat steps 2–4. Or press STOP to return to standby mode.

Printing a list of your Macro keys

Your fax machine can print a list of the Macro keys.

The list includes:

(1)each key’s Macro key number

(2)the name of the job stored in the Macro key

To print a list of Macro keys, press MACRO PROGRAM three times, ENTER.

Setting the speed for Macros

You can adjust the speed of one step in the Macro key.

1	Press MACRO KEY four times, ENTER. The LCD shows:
		Macro Speed	:Norm
		Program/Enter
2
	Press or /PROGRAM until the mode you want appears. The possible set-
	tings are:

Macro Speed :Norm

Program/Enter

Macro Speed :Slow

Program/Enter

Macro Speed :Fast

Program/Enter

3 Press ENTER to save the setting.

2.27