Muratec Series 41500E Programmable one-touch keys, Using the power of programmable one-touch keys

Press ENTER. The LCD now shows either:

Beyond the Basics

Programmable one-touch keys

Using the power of programmable one-touch keys

In order to complete some operations on your machine, you may have to follow sev- eral steps and press several different buttons. But programming your machine’s one-touch keys (73–76) can reduce those many steps to a simple press of a key.

You can “teach” the one-touch keys to carry out any of the following operations:

Communications functions:

•Delayed transmission (explained on pages 2.17–2.19)

•Broadcasting (pages 2.16)

•Regular polling (not continuous) (pages 2.31–2.32)

•Batch transmission (pages 2.20–2.23)

•F-Code transmission (pages 2.46–2.47)

•F-Code polling (page 2.47)

Programming a delayed transmission

To program a delayed transmission into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable
	one-touch number available:

Select Program No. 73:No Number Stored

Note: If a programmable one-touch number other than 73 appears on the LCD, it means that you have already entered a number for 73.

Note: To erase a programmable one-touch key, see pages 2.54–2.55.

2 Press the key that you want to program or change. Here, we’ve selected 75.

Select Program No. 75:No Number Stored

Note: If you’re changing a previously stored command: If your previous com- mand for this key was a for a delayed operation, and you want to keep this key programmed for a delayed operation, use these instructions to make changes. But if you want to assign this key to a completely different operation (to Broadcast, for example), then you must first erase the stored command before programming the new one.

3 If you want to select a different programmable one-touch key than what appears on the LCD, press that key now.

4

75:Fax#/Com-Options	or	75:Fax#/Com-Options
_		9-5558743_

5 Use the numeric keypad to enter the number exactly as your machine should dial it, including whatever codes your phone system requires. The number can be up to 40 characters in length:

75:Fax#/Com-Options 9-5550629_

Your display can show only 20 characters at a time. To view characters beyond those 20, press to scroll to the left or /PROGRAM to scroll to the right.

Important: Do not press ENTER.

Note: To erase characters, press CANCEL to erase to the left.

If you want to change just one character in the number, press to move the cursor left, or /PROGRAM to move it right. Press CANCEL to erase it. Then re-enter the number correctly.

6 Now, while you can still see the fax number on the LCD, press COM-OPTIONS,ENTER. The LCD shows:

Delayed

Enter Time: 11/20:30

2.48