Muratec MFX-1500E EasyStart, Getting started, Clearing stored settings, Entering initial settings

Press ENTER to save the clock setting and continue EasyStart.

EasyStart

EasyStart software is already installed on your Muratec fax machine. It guides you through the process of entering your machine’s settings.

Remember that the settings you make here can always be changed later. We’ll explain more in “Beyond the basics,” beginning on page 2.1.

Getting started

Determine the following before you go any further:

1 The type of dialing your telephone system requires — Choose either tone or pulse (rotary) dialing.

2 The name and fax number you want to appear on your faxes — Every fax page you send arrives at the receiving machine with a single line of text at the very top of the page. This text lists a name, called the Transmit Terminal Identifier (TTI), and a fax number. The TTI cannot be longer than 22 characters.

Clearing stored settings

Before using EasyStart, clear your machine’s built-in user data memory. This ensures the memory will hold only your settings.

Important: After you use EasyStart, do not clear the memory again unless an authorized technician asks you to do so.

To clear the machine’s memory:

1 Press /PROGRAM, *, 2. The LCD now asks if you want to clear the memory:

Clear User Settings

Check Program/Enter

Note: If you don’t want to clear the memory, just press /PROGRAM.

2 If you do want to clear the memory, press ENTER.

Getting started

Entering initial settings

Important: If you press STOP during EasyStart, your fax machine returns to standby mode (its normal condition). But it will keep the settings you saved by pressing ENTER as described in these instructions.

1 Press /PROGRAM, I, ENTER.

The LCD shows the current calendar/clock setting, with a cursor appearing under the first digit.

Enter Time

’01 01/01 00:00

2 Use the numeric keypad to enter the correct date and time, using a YYMMDD format for the date and 24-hour(“military”) format for the time. For instance, to set 8:30 PM on January 11, 2000, press 0 0 0 1 1 1 2 0 3 0, which results in:

Enter Time

’00 01/11 20:30

Note: Your fax machine automatically inserts the spaces and date-slash. All you have to do is enter the digits.

To change a digit, press to move the cursor left, or /PROGRAM to move it right. Then enter the correct digit.

3

4 The LCD now asks if you want to set the calendar/clock to automatically recognize daylight saving time (DST).

Daylight Saving:Off

Program/Enter

When the setting is On, your machine automatically recognizes DST at 2 AM on the appropriate switchover Sundays each year.

When the setting is Off, no automatic change will occur.

1.15