Muratec Series 41500E, MFX-1500E operating instructions Installing the printing supplies

Getting started

Installing the printing supplies

Your fax prints incoming faxes and copies with a reliable 400 dpi print engine. Your fax requires two types of printing supplies (sometimes also called consumables):

•The drum cartridge — It yields 20,000 normal letter-sized printouts (see “Specifications,” page AI.1). By “normal,” we’re referring to the amount of text and/or graphics on each page. This is based on an industry-standard test docu- ment.

•The toner cartridge — It yields 10,000 “normal”, letter-sized printouts (see “Specifications,” page AI.1).

To install these supplies:

1 Pull up the top cover release and open the top cover.

4	Place the new toner cartridge on a flat, clean surface.
5	Unpack the drum cartridge from its carton.
	Note: Shield the drum cartridge from light, especially strong light. Later, if
	you have to remove the cartridge from the fax, immediately wrap it in
	a thick cloth to protect it from light.
6	Set the drum cartridge on the toner car-
	tridge, making sure that the drum
	cartridge’s two pins fit in the slits inside
	the toner cartridge frame.
	Note: Do not touch the developing
	roller.
	Developing roller

7 Grip toner cartridge as shown, to avoid pinching your fingers between the toner cartridge and the printer frame. Keep the drum slot free of dust and other for- eign materials.

Keep the drum slot free of dust and other foreign materials.

2 Pull up the printer cover release and open the printer cover.

3 Unpack a new toner cartridge from its carton. Then, holding the toner car- tridge with both hands, slowly shake it as shown (note the arrows).

Note: Do not throw the toner cartridge into the fire; this will avoid any possibility of ignition and/or injury.

Do not touch the drum surface on the cartridge’s bottom.

8 Gently install the toner car- tridge in the printer, making sure the toner cartridge's four pins fit in the slits inside the printer frame.

1.8