Muratec MFX-1500E Using a relay box, Erasing an empty F-Code box, Select F-Code Box Box In Use

2 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code security box that holds the documents you want to print. We’ve entered 03:

Select F-Code Box 03:Muratec America

3 Press ENTER. The LCD shows:

03:Print F-Code Doc. Enter I.D. Code:****

Note: If the F-Code security box is not storing any documents, the machine briefly displays the following before returning to step 2:

03:Print F-Code Doc. No Document Stored

4 Use the numeric keypad to enter your F-Code box’s four-digit I.D. code. Here we’ve entered 2345:

03:Print F-Code Doc. Enter I.D. Code:2345

5 Press ENTER.

•If you’ve entered the correct I.D. code, your fax machine prints all docu- ments in the F-Code security box and then erases them.

•If you’ve entered an incorrect I.D. code, your fax machine aborts the opera- tion and returns to standby mode.

Using a relay box

Once your fax machine receives a document via ITU-Tsub-addressing to one of its F- Code relay boxes, it sends it to the other fax machines that you’ve set up on your relay box. (See “Creating or Modifying an F-Code box”, page 2.38–2.42)

If you set the Auto print mode to on when you created the relay box, your machine will print the received document, then relay it to the other machine. Otherwise, your machine will only relay it to the other machines, not print it. See “If you chose Relay,” pages 2.41–2.42 for more details on this setting.

Also, you can send (relay broadcast initiation) the document to another hub machine’s F-Code box and get that machine to relay it to others. See “F-Code trans- mission” on page 2.46 for more detail.

The hub performs a relay broadcast, and the machine which sends the original doc- ument to the hub has performed a relay broadcast initiation.

Beyond the Basics

Erasing an empty F-Code box

An F-Code box must be empty in order to erase it. (If you select an F-Code box in these steps which is not empty, the machine beeps. If this happens, print all docu- ments in that box before erasing it.)

To erase an empty F-Code box:

1 Press /PROGRAM, P, 5, ENTER. The LCD shows:

Select F-Code Box	or	Select F-Code Box
01:No Number Stored		01:Murata Machinery

2 Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-Code box you want to erase. Here, we’ve entered 0, 3 and see:

Select F-Code Box 03:Muratec America

3 If you want to erase a different F-Code box than the one that appears on the LCD, enter the box number now.

4 Press ENTER. If the F-Code box is empty, the LCD shows:

03:Erase F-Code Box Enter I.D. Code:****

Important: If you select an F-Code box which is not empty, the machine beeps and, before returning to step 3, briefly displays:

Select F-Code Box

Box In Use

Print any documents received in the F-Code box, then repeat this procedure from the beginning to erase the box. Otherwise, select another F-Code box.

5 Use the numeric keypad to enter the four-digit I.D. code. Here, we’ve entered 2345:

03:Erase F-Code Box Enter I.D. Code:2345

2.45