Muratec MFX-1500E, Series 41500E Programming a batch transmission, Batch Tx Enter Box No

Press ENTER.

ENTER, then skip to step 5.

8 Next, tell your fax to carry out this delayed command one of these ways: Option 1: Perform the command once at a certain time on a certain day of

the month. (For example, “Do this at 5:05 PM on the 30th.”)

To select this option, use the numeric keypad to enter the date and time when the fax should perform the command:

Delayed

Enter Time: 30/17:05

Option 2: Perform the command at a certain time each day you press the key. (For example, “Do this at 5:05 PM today.”)

To select this option, use the numeric keypad to enter 0, 0 and then the time the fax should perform the command:

Delayed

Enter Time: 00/17:05

9 Press ENTER, ENTER.

10 The LCD now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press STOP. Your machine returns to standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

Programming a batch transmission

For this operation to work, two things must be true:

•The batch box you’re using must exist on your fax machine.

•You must know the batch box’s identifier number (1–5).

To program a batch transmission into a programmable one-touch key:

1	Press /PROGRAM, C, 1, ENTER. The LCD shows the first empty programmable
	one-touch number available:

Select Program No. 73:No Number Stored

Note: If a programmable one-touch number other than 73 appears on the LCD, it means that you have already entered a number for 73.

Note: To erase a programmable one-touch key, refer to pages 2.54–2.55

Beyond the Basics

2 Press the key that you want to program or change. Here, we’ve selected 75.

Select Program No. 75:No Number Stored

If your previous command for this key was for a different operation (for a delayed transmission, for example), you must erase the stored command before you go to step 4 (refer to pages 2.54–2.55).

If this key was for a batch transmission, press

3 If you want to select a different programmable one-touch key than the one that appears on the LCD, press that key now.

4 Press ENTER, COM-OPTIONSthree times and then press ENTER. The LCD shows:

Batch Tx

Enter Box No. _

5 Use the numeric keypad to enter the one-digit identifier for the batch box you want to assign to this one-touch key. Here, we’ve entered 5:

Batch Tx

Enter Box No. 5_

Note: To change an identifier already entered, press CANCEL to erase it. Then re-enter the correct identifier.

6

7 The LCD now displays the next programmable one-touch key.

If you do not want to enter or change any other key’s programming, press STOP to return your machine to standby mode.

If you do want to enter or change this key’s programming, go back to step 4. If you want to enter or change another key’s programming, go back to step 2.

2.51