Muratec MFX-1500E Clearing paper jams, If an original document jams, To remove the document

Clearing paper jams

If an original document jams

1 If an original document jams, the LCD will show:

Document Jam

ContStor Enter/Cancl

	If you do wish to continue the operation, press ENTER and proceed to step 2.
	To abort the operation, press CANCEL. This will delete from memory all pages
	stored during this operation, and the machine will return to standby mode.
	Important: If you wait more than 60 seconds without pressing any key, the
		machine will delete from memory all pages stored during this
		operation and the machine will return to the standby mode.
	Note: If this document is a non-sorting ADF job (either copying or faxing), the
		machine will abort the operation anyway; instead, you’ll have to per-
		form the job again from scratch.
2	The LCD will show which page (i. e., which page number) is jammed. To con-
	tinue scanning from the jammed page forward (keeping in mind the Note at
	the end of step 1, above), press START after clearing the jam.
		p 2. Reset Document
		Press Start Key
	Note: If you wait more than 60 seconds without pressing any key, the
		machine will begin to send or copy the document(s) it has.
	If you wish to cancel this operation, press STOP. The machine will delete all
	pages from memory and then return to its standby mode.

Just in case …

To remove the document:

1 Open the scanner cover by holding the scanner cover release.

Important: Hold the cover open. It won’t stay open by itself.

2 Lift the original document from the machine.

Note: If you cannot remove the origi- nal document, open the inner cover as shown at right, then remove the document.

3 Gently close the scanner cover, making sure both sides are snapped down securely.

Note: If the original document has become wrinkled or torn, do not re-send it.

3.1