Muratec Series 41500E Code transmission and polling, 03Erase F-Code Box Check Program/Enter

Delayed

Enter Time: 15/17:05

12 Use the numeric keypad to enter the day and time when the transmission should begin, then press ENTER.

Press COM-OPTIONS,ENTER. The LCD shows:

11

Enter Fax Number

_

9 Enter the fax number either by pressing a one-touch key, entering a speed- dial number or dialing from the numeric keypad. Do not press START.

10 What you do now depends on when you want the transmission to begin.

• To have it begin now, skip to step 13.

• To delay it, go on to step 11.

8

Beyond the Basics

6 Press ENTER.

If you’ve entered an incorrect I.D. code, your fax machine rejects the attempt and returns to standby mode.

If you’ve entered the correct I.D. code, the display shows:

03:Erase F-Code Box Check Program/Enter

Note: If you want to quit without erasing the F-Code box you’ve selected, press /PROGRAM. The fax will return to step 2.

Note: If you want to quit without erasing any F-Code box, press STOP. The machine returns to standby mode.

7 Press ENTER to erase the F-Code box.

Erase F-Code Box ** Complete **

To erase another F-Code box, repeat steps 2-7.

To finish, press STOP.

F-Code transmission and polling

With F-Code, your machine can send secure transmissions, perform relay broadcast initiations and even poll from other ITU-T-equipped machines, regardless of manu- facturer.

You can do this two ways:

•Using the programmable one-touch key (see pages 2.52-2.54)

•Entering the ITU-Tsub-address and password directly, which is what we’ll describe here.

Note: For F-Code communication to work, three things must be true:

•The remote fax machine must support ITU-Tsub-addressing

•The remote fax must have a mailbox with an ITU-Tsub-address created on it

•You must know the ITU-Tsub-address and password (if any) for the remote machine’s mailbox

F-Code transmission

1 Insert the document.

2 Adjust the resolution and contrast if necessary.

3 If you want to toggle between manual transmission and memory transmis-

sion, press MEMORY TRANSMIT.

4 Press COM-OPTIONSfour times and then press ENTER.

Enter Sub-Address

_

5 Use the numeric keypad to enter the appropriate sub-address in the remote machine. In this example, we’ve entered 123456.

Enter Sub-Address 123456_

Note: If you make a mistake, press CANCEL to erase the character, then enter the correct number.

6 Press ENTER. The LCD shows:

Enter Password

_

Note: If this sub-address does not have a password, skip to step 8.

7 Use the numeric keypad to enter the password. In this example, we’ve entered 654321.

Enter Password 654321_

Press ENTER. The LCD shows:

2.46