Muratec MFX-1500E, Series 41500E Set BlockJunk Dial Program/Enter, Enter Fax Number 01555-3038

4 The LCD now asks if you want to enter a number:

Set BlockJunk Dial

Program/Enter

If you want to enter or modify a number, press ENTER and go on to step 5. Otherwise, press /PROGRAM and skip to step 10.

5 Depending on if you have already entered at least one number into the blocked numbers list, the display shows one of the following:

		Enter Fax Number	or	Select BlockJunk No.
		01:_		01:555-2971
6
	If you want to modify an existing entry in the blocked numbers list, press
	or /PROGRAM until you see the number you want to modify.

… or …

If you want to enter a new number in an already-started blocked numbers list, press or /PROGRAM until you find an empty position in the list.

	Then press ENTER to enter or modify the blocked number.
	Note: To clear a number from the list, see “Clearing a number from the
		blocked numbers list,” right column.
7	Use the numeric keypad to enter the last eight characters of a fax number you
	want to block. For example, if you want to block a fax from someone with a
	Subscriber ID of 972-555-3038,you should enter 5, 5, 5, DIALING OPTIONS, 3, 0,
	3, 8:
		Enter Fax Number
		01:555-3038
	To change a specific digit, press to move left or /PROGRAM to move right
	until the cursor is under the digit, then use the numeric keypad to enter the
	correct number.
8	Press ENTER to save the setting. The display shows the next “slot” in the
	blocked numbers list.
	If you do not want to enter or change a number for this slot, go on to step 9.
	If you do want to enter or change a number for this slot, repeat steps 5–8.
9	Press STOP. The display now asks if you want to print the list.
		Print BlockJunk Dial
		Enter/Stop
10
	If you do want to print the list, press ENTER and your machine will print it.
	If you don’t want to print it, press STOP and your machine will return to

standby mode.

Beyond the Basics

Clearing a number from the blocked numbers list

To clear a number from the list:

1	Press		/PROGRAM, J, 1, 1, ENTER.
	If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
		Block Junk Fax:Off
				Program/Enter
2
	Press		or	/PROGRAM until you see your preference, Mode2 or Mode3.
		Block Junk Fax:Mode2
				Program/Enter
3
	Press ENTER, ENTER. The display shows:
		Select BlockJunk No.
		01:555-2971
4
	Press		or	/PROGRAM until you see the number you want to clear.
5	Press CANCEL to clear the number.
	To clear another number from the blocked numbers list, repeat steps 4–5.

Otherwise, go on to step 6.

6 Presslist. STOP. The display now asks if you want to print the blocked numbers

Print BlockJunk Dial

Enter/Stop

If you do want to print the list, press ENTER and your machine will print it. Otherwise, press STOP to return your machine to standby mode.

2.61