Muratec Series 41500E 1Forwarding Number 14567,01,S002,G3, 1Fax Forward On Program/Enter

Beyond the Basics

4 Press ENTER. The LCD shows:

1:Forwarding Number

_

5 Enter the fax number for the remote fax to which you want documents to be transferred. Use either a one-touch number, a speed-dial number, a call group or regular number dialed from the numeric keypad.

If you are entering only one number for transferring, skip to step 7.

To add any additional fax numbers for this operation, proceed to step 6.

6 To add more fax numbers, press BROADCAST between each one to insert a comma, then enter the number as described in step 3.

You can specify up to 201 numbers for transferring.

Note: You can enter only 1 location by using numeric keypad.

1:Forwarding Number 14567,[01],S002,G3_

Important: Do not insert a comma after the last fax number.

Note: If you enter characters by mistake, press CANCEL to clear them.

7 Press ENTER to save the setting. The LCD will show:

1:Fax Forward :On Program/Enter

If you want to set to off, press or /program until the mode you want appears.

8 Press ENTER. The LCD will show:

Start transferring	End transferring
day and time	day and time

9	Use the numeric keypad to enter the day and time. The machine asks time
	period that the machine will transfer documents.
	How to enter the day and time:
	• To enter the day, press following numeric keypad.
	Numeric keypad 0:	Sunday
	Numeric keypad 1:	Monday
	Numeric keypad 2:	Tuesday
	Numeric keypad 3:	Wednesday
	Numeric keypad 4:	Thursday
	Numeric keypad 5:	Friday
	Numeric keypad 6:	Saturday

• To enter the time, using numeric keypad.

• If you do not wish to set up the day and time, enter *.

Note: To change only one digit, press to move the cursor leftward, or /PROGRAM to move it rightward, to that digit. Then, enter the correct

digit.

Example 1: When you set the start transferring time for 7:00 at Tuesday, and set the end transferring time for 19:00 at Friday, press 2 0 7 0 0 5 1 9 0 0, which results in:

1:Enter Time

Tue 07:00--Fri 19:00

Example 2: When you set the start transferring time for 7:00 and set the end transferring time for 19:00 everyday, press * 0 7 0 0 * 1 9 0 0, which results in:

1:Enter Time

*07:00-- * 19:00

Example 3: When you set the start day for Tuesday, and set the end day for Friday, press 2 * * * * 5 * * * *, which results in:

1:Enter Time

Tue **:**--Fri **:**

10 Press ENTER to save the setting. The LCD will show:

1:Auto Print :Off Program/Enter

2.36