Muratec MFX-1500E Masking the PIN, Set Security Rx Enter Time, Print Mem Rx Doc Enter Passcode

6 If you want security reception to begin now (and at this same time every day), skip to step 9.

Otherwise, go on to step 7.

7 Use the numeric keypad to enter the time (use a 24-hour format) when secu- rity reception should begin every day. “Type over” the numbers displayed. Here, we’ve entered 17:35:

Set Security Rx

Enter Time: 17:35

To change a digit, press to move to the left, or /PROGRAM to move right. Then enter the correct digit.

9 Press ENTER to save the setting.

Printing from security reception / Turning off security reception

When security reception is on, an incoming fax goes directly into your machine’s memory and the MEMORY RECEIVE light comes on. But the fax is not printed.

To retrieve the faxes received during this security reception (and to return your machine to normal reception until the next time):

1 Press /PROGRAM, O [the letter O, not a zero], 2, ENTER. The LCD shows:

Print Mem Rx Doc.

Enter Passcode: ****

2 Use the numeric keypad to enter the passcode. Here, we’ve entered 6296:

Print Mem Rx Doc.

Enter Passcode: 6296

3 Press ENTER.

•If you’ve entered the correct passcode, your fax machine will print all docu- ments in its memory and then erase them. Then it will turn security reception off until the next time you’ve scheduled security reception.

•If you’ve entered an incorrect code, your fax machine will refuse to print, and security reception remains on.

Beyond the Basics

Masking the PIN

To prevent unauthorized long-distance calls, some office telephone systems require you to enter a personal identification number (PIN) whenever you dial long distance.

Your fax’s PIN mask feature helps you keep that PIN number private. With the PIN mask activated, you can dial a fax number plus a PIN, but the PIN will not appear in a journal, error message printout, delayed command list or a TCR. The PIN may be up to eight characters in length. It also can include the * or # symbols, and it can be entered from the numeric keypad.

There are three possible settings for the PIN mask:

•Off — Turns off the PIN mask feature. Any PIN you enter will appear on any dis- play or printout which shows the number you dial.

•Mode 1 — Each remote fax unit has a departmental PIN access code.

•Mode 2 — Each fax user has a departmental PIN access code.

Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you must store the remote unit’s PIN access code within that number. However, if you select Mode 2, this isn’t necessary. (See “Autodialing while using the PIN mask,” next page for further details.)

Note: If you select either Mode 1 or Mode 2 and will be using batch transmission (see pages 2.20 – 2.23), you must store the PIN access code for the remote unit within the appropriate batch box.

Activating the PIN mask

Important: For this feature to work, you must have activated the passcode protec- tion as described on page 2.56. You must also know the passcode.

1	Press /PROGRAM, J, 1, 5, ENTER. The LCD shows:
		Set PIN Mode
		Enter Passcode :****
2
	Use the numeric keypad to enter the four-digit passcode. Here, we’ve entered
	6296.
		Set PIN Mode
		Enter Passcode :6296
	Note: If you enter an invalid passcode, the machine’s security feature rejects
		the attempt and returns to standby mode.
3	Press ENTER.
		PIN Mode	:Off
		Program/Enter

2.57